beautypg.com

Network - advanced tcp/ip settings – Axis Communications 207W User Manual

Page 29

background image

29

AXIS 207W/AXIS 207MW - System Options

AXIS Internet Dynamic DNS Service - use the AXIS Internet Dynamic DNS service to

assign a host name for easy access to your camera. Click Settings... to register your camera

with the service, or to modify the existing settings. The domain name currently registered

at the Axis Internet Dynamic DNS service for your product can be removed at any time.

For more information, please see the online help.

Network - Advanced TCP/IP Settings

DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on your

network.

Obtain DNS server address via DHCP - automatically use the DNS server settings provided

by the DHCP server. Click the View button to see the current settings.

Use the following DNS server address - enter the desired DNS server by specifying the

following:

Domain name - enter the domain(s) to search for the host name used by the AXIS

207W/AXIS 207MW. Multiple domains can be separated by semicolons (;). The host name

is always the first part of a Fully Qualified Domain Name, e.g. myserver is the host name

in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com

is the Domain name.

DNS servers - enter the IP addresses of the primary and secondary DNS servers.

NTP Configuration
Obtain NTP server address via DHCP
- check this radio button to automatically look up

and use the NTP server settings as provided by DHCP. Click the View button to see the

current settings.

Use the following NTP server address - to make manual settings, check this radio button

and enter the host name or IP address of the NTP server.

Host Name Configuration
The AXIS 207W/AXIS 207MW can be accessed using a host name, instead of an IP

address. The host name is usually the same as the assigned DNS Name.

For more information, please see the online help.

Link-Local IPv4 Address
This is enabled by default and assigns the camera an additional IPv4 IP address for use

with UPnP

. The camera can have both a Link-Local IP address and a static or

DHCP-supplied IP address at the same time - these will not affect each other.