Audiovox ACD-12 User Manual

Page 7

128-6196A

7 of 16

OPEROPEROPEROPEROPER

AAAAA

TTTTT

ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC

TTTTT

IONSIONSIONSIONSIONS

OPER

OPER A

TT ING INSTRUC

ING INSTRUC

ING INSTRUCT

TT IONS

IONS

POWER ON-OFF BUTTON

Press this button to turn the unit on and off
when the ignition switch is on. When the unit is
off, the time of day is automatically displayed
on the Liquid Crystal Display (LCD) panel
unless the ignition switch is off. If the radio is
off when the ignition switch is turned off, the
POWER button must be pressed to turn on the
radio after the ignition switch is turned on. If the
ignition switch is turned off while the radio is
on, the radio will come on automatically when
the ignition switch is again turned on.

VOLUME CONTROL BUTTONS

To increase the volume level, press the
VOL + button. The volume will increase and the
level will be shown on the display panel from
a minimum of V 0 to a maximum of V 63. To
decrease the volume level, press the VOL -
button. The display will automatically return to
the normal indication 5 seconds after the last
volume adjustment or when another function
is activated. These buttons are also used
in conjunction with the SEL button to adjust

the bass, treble, balance and fader levels as
described in

,and

SELECT (SEL) BUTTON

This button is used to select the audio func-
tion (volume, bass, treble, balance or fade) to
be adjusted using the VOL + and - buttons.
Pressing the Select button once will set the
unit for volume adjustment (VOL will momen-
tarily appear on the display panel, followed a
few seconds later by VOL and the setting num-
ber). Pressing the button additional times will
select bass adjustment (bAS on display
panel), treble adjustment (TRE), balance (bAL),
fader (FAd), and volume (VOL) again. The dis-
play will return to the normal indication 5
seconds after the last adjustment or when
another function is activated.

BASS CONTROL

To adjust the bass level, first select the Bass
mode by pressing the SEL button until the bAS
indication appears on the display panel.. Within
5 seconds of choosing the Bass mode, press
the VOL + or - buttons to adjust the bass

POWER

ACD-12

EJECT

MUTE

BAND

T/F

MONO/INT

LOUD/RND

VOL

SEL

LOC/RPT

RADIO

AUX

11,20

12,19

3, 4, 5, 6, 7