Asus II E2949 - Manual (Page 23)

3-5
5. If you select Share-WEP, WPA-
PSK, or WPA2-PSK in Step
4, you are required to input a
password. You can choose to
configure the password in either
ASCII or HEX mode. If you
choose HEX mode, input 10 hex
digits for 64-bit encrytion, or 26
hex digits for 128-bit encryption.
Click Next to continue.
6. Select your Internet connection
and click Next.
7. The AP mode configuration is
complete. Record the setup
information on your note and
click Finish to quit the ASUS
WiFi-AP Solo wizard.