1 about the setup utilities – Asus II E2949 User Manual
Page 20
3-2
3.1
About the setup utilities
After you have installed the WiFi-AP Solo drivers and utilities to your system, you
are now ready to setup the WiFi-AP Solo in your network.
The WiFi-AP Solo provides two configuration approaches: the setup wizard and the
setup utility. The former scheme provides an easy approach to the most frequently
used functions while the latter allows configuring all the functions, including the
advanced settings.
For normal users, the setup wizard helps to:
1. configure the WiFi-AP Solo as an access point, or wireless station.
For advanced users, the setup utility helps to:
1. configure the WiFi-AP Solo as an access point, or wireless station;
2. enable or disable the WiFi-AP Solo; and
3. show statistics.
Make sure that you have selected the most appropriate configuration for your
wireless network before you proceed. Refer to section 1.4 for details.
Make sure you have connected the supplied antenna to the antenna connector
on the motherboard, or the WiFi-AP Solo may not be able to detect other
wireless devices in your environment.