Atlantis Land A02-G4(8)/M2 - Manual (Page 14)

11
♦ AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 ~ 240
V AC at 50 ~ 60 Hz.
LED Indicators
The LED indicators of the Switch include Power, Link/Act,
1000Mbps and 100Mbps. The following shows the LED indicators
for the Switch along with an explanation of each indicator.
The 4-port 10/100/1000Mbps Gigabit Ethernet Switch LED
indicators
♦ POWER: This indicator lights green when the Switch is
receiving power, otherwise, it is off.
♦ LINK/ACT: These LED indicators are lighted up when there
is a secure connection (or link) to the desired port. The LED
indicators blinking whenever there is reception or transmission
(i.e. Activity—Act) of data occurring at a port.