Asante Technologies IntraCore 3548-2GT Series - Manual (Page 3)

asante.com/intracore 3548/V2/0917/2002 3
SPECIFICATIONS
Connectors: Gigabit Ethernet with Auto-Uplink™ (10/100/1000BaseTX): RJ-45
Console: Serial (RS-232): DB9
Expansion: 4 front-mounted ports for 2 x GBIC or 2 x 1000BaseT copper RJ45 (Auto Switching between each pair GBIC/1000T)
Status Indicators: Separate link-activity, speed (10/100/Gigabit) and duplex (full or half) LEDs for each port; system power
Management Features
Graphical User Interface:
HTML browser-based with password protection for local and remote management
Command Line Interface: Menu-driven telnet or out-of-band via front panel console port
Front Panel: Graphical representation of unit with real-time network status
General Information: Software version, dual firmware banks; admin, system and bootstrap info; switch address and uptime system clock
Statistics: User-configurable graph types (bar chart, line chart, table); counters (since up, rate, since reset) for RX/TX/Error for
each port and unit. Table view also shows current, peak average and total packets for each port
Port Configuration: State (forwarding, blocking), status (enabled, disabled), link status (up, down) and mode (speed, duplex); auto
negotiation, flow control, priority and security. Detailed statistics include TX counters (total frames, total bytes,
dropped frames), RX counters (total frames, total bytes, unicast, non-unicast), frame counters (multicast, broadcast,
by packet sizes), collisions and errors (undersized, oversized, CRC/alignment, fragments, FCS, late events, total)
Spanning Tree: Displays bridge ID, designated root, root port, root port cost, hello time, maximum age and forward delay; ports
individually configurable for STP parameters (priority, path cost)
SNMP: Separate read and write communities, and trap authentication; 4 configurable trap receivers (IP address and
community)
Address Table: Per-port counts for MAC and IP addresses; integrated utilities to sort or search for specific IP or MAC addresses;
address table shows unit, port, entry (dynamic, static or multiple), IP address, MAC address and VID
VLAN: 64 VLAN’s supported. Configurable PVID, frame type and ingress filtering
QoS: IEEE802.1D/p/Q standards – 4 queues per 10/100 port, 8 queues on Gigabit ports
RMON: Embedded remote monitoring supports four groups (history, statistics, alarms and events)
Security: Configurable per-port security with programmable action (e.g., new node detection trap) and trusted MAC address
Supported OS: Windows 95/98/Me/NT/2000/XP, Mac OS 9/X and Linux
Other: Integrated utility to detect duplicate IP addresses (port, owner MAC address, IP address and spoofer MAC address)
Physical Characteristics
IntraCore 354 8: 435mm x 257mm x 41mm (17.125" x 10.125" x 1.625") , 8.0 lbs (3.6 Kg)
Mounting: Install into a standard 19-inch rack (1 RU height) or placed on a desktop; rackmount kit and rubber feet included
IC35 Modules:
2.19 x 3.63 x 1.19 (56 x 92 x 30 mm), 0.13 lbs (0.06 Kg)
Environmental Range
Operating Temperature:
32º to 104º F (0º to 40º C)
Relative Humidity: 10% to 90% non-condensing
Power: Auto-switching, 110/240 VAC, 50/60 Hz; grounded IEC cord
Redundant DC Power: 12 VDC Auto switching from main 110/240 VAC for emergency backup
Standards Compliance
IEEEE:
IEEE 802.1D spanning tree and bridge filters
IEEE 802.1p prioritization (class of service)
IEEE 802.1Q virtual LAN (VLAN)
IEEE 802.3x full duplex and flow control
IEEE 802.3z 1000BaseSX over 50 micron multi -mode fiber; maximum distance 1,804 feet (550 meters)
IEEE 802.3ab 1000BaseT over Category 5 UTP (4 pairs); maximum distance 328 feet (100 meters)
IEEE 802.3u 100BaseTX over Category 5 UTP (2 pairs); maximum distance 328 feet (100 meters)
IEEE 802.3 10BaseT over Category 3 UTP (2 pairs); maximum distance 328 feet (100 meters)
IETF: RFC 1155 SMI
RFC 1757 RMON
RFC 1157 SNMP
RFC 1493 Bridge MIB
RFC 1213 MIB II
Asanté Private MIB
Safety:
UL 1950, CUL, TUV/GS,
Emissions: FCC Class A, CE