AEG COMPETENCE D2160-1 - Manual (Page 10)

B) TO SET THE TIMER TO SWITCH OFF
ONLY
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
Selector Control button until the 'Cook Time'
( ) indicator is illuminated. Press the
increase control (+) until the required length
of cooking time is displayed, e.g. 2 hrs 15
mins as Fig. 10. Depress the decrease
control (-) if necessary.
iv) Release the buttons. The 'Cook Time'
indicator ( ) will illuminate and the time
of day will be displayed after 5 seconds.
v) Set the oven temperature. The oven
indicator neon should be ON.
vi) To check the End Time during the cooking
period, simply press the Selector Control
button once and the remaining time will be
displayed, as Fig. 11.
4. TO CANCEL AN AUTOMATIC
PROGRAMME
i) To cancel an automatic programme press
the Selector Control button until the Cook
Time indicator ( ) flashes. Press the
decrease control ( - ) until the display reads
0.00 as Fig.12.
ii) Release the buttons. The 'Cook Time'
indicator ( ) will flash and after 5
seconds return to the time of day
iii) Turn off oven control.
5. TO RETURN THE APPLIANCE TO
MANUAL
At the end of a timed cooking period, the
indicator neon will flash and an alarm will sound
for up to 2 minutes.
i)
To stop the sound press any of the three
buttons, as Fig. 13.
ii) The display will return to the time of day.
iii) Turn off the oven controls.
9
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13