American Water Heater NRGSS01210 - Manual (Page 2)

Order Entry and Sales
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)
Johnson City, TN 37602-4808
(800) 937-1037
FAX (800) 581-7224
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
Distributed By:
Warranty and Service
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 1597 (Mailing)
Johnson City, TN 37605-1597
(800) 456-9805
FAX (800) 999-5210
Residential Gas High
Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank
warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated
input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA4.1 standard.
1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings
are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control
thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted
NRGSS01210 Revised August 2010
Inlet and outlet connections: 3/4” male
Circulation loop connections: 3/4” female
Gas inlet:1/2”
Maximum Supply Pressure: 14 inches W.C. (3.48kPa)
Minimum Supply Pressure for Natural Gas: 3.50 inches W.C. (.87kPa)
Minimum Supply Pressure for Propane Gas: 8.00 inches W.C. (1.99kPa)
Minimum pressure must be maintained under both load and no load
(dynamic and static) conditions.
Electrical Characteristics - 120V, 60Hz, Amperes <5
* Available in LP - Change N to P when ordering.
96% THERMAL EFFICIENCY CONTINUOUS HOT WATER VERSATILE POWER DIRECT VENT
CODES AND STANDARDS
• Design-certified by UL (Underwriters Laboratories) according to ANSI Z21.10.3 - CSA 4.3 Standards
• This model meets or exceeds the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current
edition ASHRAE/IESNA 90.1
MODEL
NUMBER*
BTU
INPUT
PER HOUR
GALLONS
OR
LITRES
FIRST HOUR
DELIVERY
GALLONS
OR
LITRES
RECOVERY
GALLONS
OR
LITRES
90°F/50°C RISE
DIMENSIONS
INCHES/CENTIMETERS
SHIPPING WEIGHT
LBS/KG
A B C D E F
VG6250T100NV 100,000
50 164 129 66-3/4 49-1/4 22 15-3/4 3 8 255
189 621 488 169.55 125.09 55.88 40 7.62 20.32 115.7
OPTIONAL CONCENTRIC VENT KIT
3” DIAMETER
PVC VENT/EXHAUST
3” DIAMETER PVC
INTAKE/COMBUSTION AIR
1 1/2” *21 1/8”
4 1/2” DIAMETER 1 3/16”
**39”
227431 NRGSS01210.indd 2 227431 NRGSS01210.indd 2 8/10/10 2:43 PM 8/10/10 2:43 PM