Floor heating mode, Jet cool operation – LG AQNH09GALA0 User Manual
Page 16
16 Air Conditioner
Operating Instructions
The Floor Heating Mode can be controlled by using the remote controller.
1. Press the ON/OFF button to start the unit.
2. Press the FLOOR HEATING MODE button.
3. To cancel the floor heating mode, press the FLOOR HEATING MODE
button again and unit will operate in previous mode.(Heating mode)
※
This mode will close the upper horizontal vane, concentrate the hot air to bottom discharge. ( But it can
make noise, so use it if you want quick heating.)
※
Floor Heating Mode is available only heating mode.
※
While Auto Swing Mode is operating, upper vane will not close in Floor Heating Mode.
※
When upper vane is set other position except default, Floor Heating Mode work after 1 min.
Floor Heating Mode
KHDWHU
Jet Cool Operation
Jet cool function can be used to cool the room quickly in hot
summer. When this function is turned on, the air conditioner
Runs in cooling operation mode with super high fan speed and
18°C setting temperature for fast and effective cooling.
• Jet cool function cannot be activated during Auto Changover
Operation or Heating Mode.
NOTE