LG AQNH09GALA0 - Manual (Page 10)

Turning on the breaker closes the flap. (This is a normal procedure)
• Be careful not to cool (heat) the room too much. Keeping the temperature setting at a moderate level
helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every two weeks.
10 Air Conditioner
Preparation Before Operation
Check the indicator for a.m. and p.m.
NOTE
Setting the Current Time
Air Flow Selection
Turn the breaker ON
Tips for Saving Energy
■ Make air flow selection according to what suits you.
■ 2 Vane Mode will automatically change blowing pattern depending on the operating mode & situation.
■ 1 Vane Mode is using only Upper air outlet
■ If you want to change air flow mode, you ask to installer. ( Default is 2 Vane Mode )
Operating Mode Situation Blowing Pattern
1. When the room has become fully cool.
Cooling Mode
2. When 1 hour has passed since turning on the
Using only upper air outlet.
air conditioner.
1. At start of operation or other times when the
Using upper & lower air outlet. room is not fully cooled.
Heating Mode
1. Nomal Operation
1. At start or when air temperature is low.
Using only upper is outlet.
1. Press the Set/Clear button for 3seconds. p
- The AM/PM icon flickers at the bottom of the display screen.
2. Press Time Setting buttons until the desired time is set. o q
3. Press the Set/Clear button. p