LG LZ-H100GXN0 - Manual (Page 16)

Temperature setting/Room Temperature check
We can simply adjust the desired
temperature.
• Press the buttons to adjust the
desired temperature.
: Increase 1˚C or 2˚F per one time
pressing
: Decrease 1˚C or 2˚F per one time
pressing
Cooling operation:
- The cooling mode doesn't work if
desired temperature is higher than set
temperature Please lower the desired
temperature.
Heating operation:
- The heating mode doesn't work if desired
temperature is lower than set
temperature Please increase the desired
temperature.
1
Temperature Setting
• For air-cooling drive, from 18°C to 30°C, and for heating drive, from 16°C to 30°C, you can select
desired temperature.
• 5°C is proper for the difference between room and outside temperature.
• Ventilation unit canʼt reach to the set temperature because the air is supplied from outdoor.
• This unit cannot control room temperature. If this is needed, do not install the ventilation unit
alone, but rather install another indoor unit.
• Room temp: not display in single operation.
• Set temp: Indicate the temperature that user
want to set.
h Depend on what kind of controller, the desired
temperature can be adjusted at 0.5˚C or 1˚F.
Additional Function
16 Ventilator