ArtDio IPS-2101h - Manual (Page 24)

IPS-2101h User Manual
24
11.2 MGCP Web Configuration Example
With MGCP protocol used, please change the following parameters and leave the other setting
as default. (Detailed MGCP information, please contact your VoIP service provider)
z Use
service：Please check
z Service
type：Select “common” if not specified by your VoIP service provider.
z Service addr：Enter the IP address or the domain name of the Gatekeeper of your VoIP
service provider.
z NAT
traversal：Select “stun”.
z NAT addr：Enter the NAT IP address or the domain name provided by your VoIP service
provider.
z Phone number：Enter the phone number provided by your VoIP service provider.
z Account：Enter “aaln/0” if not specified by your VoIP service provider.
z PIN：Enter the account password provided by your VoIP service provider.
z Register port：Normally will be 2427.
z Signal port：Normally will be 6800.
z Control
port：Normally will be 6800.
z RTP
port：Normally will be 6800.
z Local type：Select “phone number” if not specified by your VoIP service provider.
z Call type：Normally select “advance”.