Audiovox P-25 User Manual

Page 4

-3-

STATIONPRE-SETMEMORIES

To set any of the 6 pre-set memory buttons, use the following
procedure:
1. Turn the unit on and select the desired band.
2. Select the first station to be pre-set using the Manual

Up/Down

or Automatic Seek

Tuning functions.

3. Press the pre-set button to be set and continue to hold the

button in. The volume will momentarily mute and then return
and the pre-set number will appear on the display panel. The
station is now set into the memory of that pre-set button and
can be re-called by momentarily pressing the button.

4. Repeat the above procedure for the remaining 5 pre-sets on

the band in use and for the other 4 bands of the unit.

LIQUID CRYSTAL DISPLAY PANEL

The Liquid Crystal Display (LCD) panel displays the frequency,
time and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to

cold temperatures for an extended period of time, they
will take longer to illuminate than under normal condi-
tions and the visibility of the numbers on the display
may decrease. The LCD read-out will return to normal
when the temperature increases to a normal range.

CASSETTEDOOR

Hold the cassette with the exposed tape edge to the right, and
insert into the tape door. Depress fully until the cassette is en-
gaged and begins playing. When the cassette reaches the end
on the side of the tape being played, the unit will automatically

change direction of play as shown by the arrow indications on
the display panel and play the other side of the cassette.
NOTE: Observe cassette operation cautions in Care and Main-

tenance section of this manual.

FAST-FORWARD BUTTON (FF)

Pushing the Fast-Forward button will cause the tape to move
rapidly in the forward direction of play (tape direction arrow on
the display panel will flash). To stop Fast-Forward movement,
lightly push the Rewind Button

until the Fast-Forward button

disengages.

REWIND BUTTON (REW)

Pushing the Rewind button will cause the tape to move rapidly
in the reverse direction of play (tape direction arrow on the dis-
play panel will flash). To stop Rewind movement, lightly push
the Fast-Forward button

until the Rewind button disengages.

PROGRAM SELECTOR

To manually reverse tape direction and play the other side (pro-
gram) of the cassette, lightly push both the Fast-Forward

and Rewind

buttons at the same time. The change of direc-

tion will be shown by the tape direction arrows on the display
panel.

EJECT BUTTON ( )

Tape playback is stopped and the cassette is ejected by press-
ing this button, which also has the function of switching over to
radio operation.