Audiovox D1750T - Manual (Page 13)

- 12 -
SYSTEM CONNECTIONS
NOTE: Before plugging the power cord into an AC outlet, make sure that all
the connections have been made as described below.
Power Supply Connection
Connect the supplied adapter to the side of the DVD player in the jack
marked “DC 12V In”. Plug the two-prong end of the power cord to an
AC100-240V outlet. If you have difficulty inserting the plug, turn it over and
reinsert it. If the DVD Player will not be used for a long time, disconnect the
plug from the outlet.
Connecting To a TV
Audio/video connections
Always ensure that the DVD player, TV and any other electrical equipment to
be connected to the DVD player is switched OFF.
The easiest way to connect the DVD player to a television is via the supplied
Audio/Video cable. Connect the audio/video cable from the DVD player to
the audio/video inputs of the TV.
NOTE:
This player only supports a NTSC input signals. Make sure to
choose the NTSC input signal type. If the picture is distorted or colorless,
please check if the type of the input signal. Remove the signal input and
restart the player.