Audiovox PROV916 S User Manual
Page 14
128-6745
14 of 31
-
14
-
Turning the PROV916/PROV916 S/PROV916 P On or Off
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen
downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while
the system is in use.
2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use
the internal backlighting will illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle by pivoting the screen to
optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Overhead Dome Lights
The lights integrated into the PROV916/PROV916 S/
PROV916 P are controlled by a three position slide
switch. Sliding the switch to the on position will turn
the lights on. The off position will prevent the lights
from turning on at all times, and the auto position will
allow the lights to turn on and off with the vehicle’s
interior lighting. Refer to the Installation Manual for the
wire connections. Do not leave the vehicle unattended
with the dome light switch in the on position, as this
could result in a discharged battery.
CHANNEL
SOURCE
VOLUME
FM
SELECT
O N O F F A U T O
AUTO
PROG
HE
AD
PH
ON
ES
IN
PU
T
A
U
D
I
O
L
R
V
ID
E
O
IR
S
Dome
Light
Switch
AP