Alliance Laundry Systems LWS05N - Manual (Page 11)

-11-
201959
5. Set WASH/RINSE temperatures.
The Energy Saver settings, marked with an
asterisk (*), show which temperature settings will
use the least energy.
6. Set LOAD SIZE (WATER LEVEL) control. Use
RESET if agitation has started and more
water is needed.
IMPORTANT: Holding the LOAD SIZE (WATER
LEVEL) control in the RESET position can cause
flooding of the washer.
7. Select the cycle according to the type of
fabric being washed. Push the timer knob in
and turn clockwise to the desired cycle and
wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches
the level you selected.
NOTE: Lid must be closed for agitation and spin
to start.
The washer will stop (pause) shortly before the
wash and rinse spins. Do not turn the timer
through these pauses. They are part of the
cycle.
TLW2080N TLW2080N
TLW2081N TLW2081N