LG IPS231B-BN - Manual (Page 13)

12
Control Panel Functions
INPUT Button
Use this button to turn the display on or off. Power Button
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
(SOURCE Hot key)
Exit the OSD(On Screen Display). EXIT Button
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
IPS231P/IPS231B : 1920 x 1080
Power Indicator The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Power Saving), the power indicator is blinking blue.