LG NB4530B - Manual (Page 13)

Connecting 13
C
onnecting
2
y If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note
Connecting to your TV
You can listen to the sound from your TV via the
unit. There are two ways of connecting your TV to
the unit.
Using an HDMI cable
You must connect the TV that supports ARC
function if you want to listen to TV sound using an
HDMI cable. And turn on SIMPLINK of your TV.
(HDMI cable is not included.)
1. Connect the HDMI OUT jack on the back of
the unit to ARC jack on the TV using an HDMI
cable (Type A, High speed HDMI™ cable with
Ethernet).
HDMI cable
2. Turn TV and the unit on. ARC function is
selected automatically.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control :
Power on/off, volume up/down, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
Depending on the state of the unit, some
SIMPLINK operation may differ from your
purpose or not work.
,
Note