LG AN-TP300 - Manual (Page 3)

고
객
지
원
3
For a newly purchased or replaced Touch Pen, you need to pair it with the dongle again.
If the indicator LED is turned off, pairing has not been successful. Please try pairing again.
Once paired, the indicator LED will turn green when you press the Touch Home button.
Pairing is not possible when the battery is low.
If the Touch Pen does not work, reset the Touch Pen (see page 8) and try pairing again.
NOTE
Using The Touch Pen With A TV
XVE#LQ#4
XVE#LQ#5 Dongle
1
Connect the dongle to the USB port of the TV.
2 If the dongle is connected correctly, the dongle's indicator LED will turn on and a mes-
sage will appear on the TV to indicate that the dongle is connected.
3
Follow the steps below to pair the dongle with the Touch Pen.
Check whether the red LED of the paired dongle is turned on.
Place the Touch Pen within 10 cm of the dongle.
Press the Power button of the Touch Pen once.
The indicator LED of the Touch Pen will turn green when pairing is complete.