LG 34UM95-P - Manual (Page 8)

ENGLISH
8 asseMblInG anD PRePaRInG
Installing the Monitor
assembling the stand
1 Place the screen face down.
stand Hinge
y To protect the screen from scratches, cover
the surface with a soft cloth.
CaUTIon
2 Mount the stand base onto the stand hinge
as shown in the illustration. Fix two screws
into the back of the stand base and close the
screw cover.
stand base
120 mm
screw Cover
or
100 mm
y The stand height is adjustable by 20 mm
y When tightening the screws after mounting
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Other-
wise, the product may fall, causing personal
injury or damage to the product.
y Be careful not to hurt your hand on the edges
of the screw covers.
y Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
y If you use the monitor panel without the
stand base, its joystick button may cause the
monitor to become unstable and fall, result-
ing in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
CaUTIon