Refrigerator installation – LG LBC20514SW User Manual
Page 16

15
4. Removing the Freezer Door
• Before beginning, make sure you completely remove
the refrigerator door.
• Loosen the two screws from the base grille and remove
(1).
• Loosen and remove the two screws (2) and the pin (3).
• Raise and remove the freezer door (4) and set aside.
5. Installing the Freezer Door
• On the bottom left side, you will find a screw, remove
it and re-screw it in on the right side. In the remaining
space, place the hinge (1) and connect it with the two
screws (2) and the bolt (3).
• Install the base grille (4).
• On the bottom right side of the door, you will find two
screws (5), a bolt (6) and 1 pivot (7). Remove them.
• Reinstall the pivot (8), the bolt (9) and screws (10) on
the bottom left side of the door.
• On the top part of the door, you will find a cap (11) and
a pivot (12). Remove them with a flat head screwdriver
and install them on the opposite side (the cap stays on
the right and the pivot on the left).
Pivot
Cap
• In the middle section of the refrigerator, you will find a
screw (13) and a cover (14). Remove them and reinstall
them on the right side (15).
• Place the hinge in the middle part of the refrigerator
and install the four screws into the hinge (16 & 17).
4
3
2
1
6
5
7
8
10
9
11
12
17
16
REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
4
3
2
1
13
14
15