LG BX286 - Manual (Page 17)

English
English
Installation
Warning Indicator
 When the “TEMP” LED i ndicator lights red , it indicates the
projector has overheated. The projector will automatically
switch to eco mode.
When the projector keep overheated for 60 seconds under
eco mode, the projector will automatically shut itself down.
If the problem persists, you should contact your local dealer
or our service center.
 When you see the message below displays on-screen, the
projector has detected that the lamp is approaching its end
of life. Please change the lamp as soon as possible or contact
your local dealer or our service center.
 When the “TEMP” LED indi cator flashes red and the mes-
sage below displays on-screen, it indicates the fan failed.
Stop using the projector and disconnect the po wer cable
from the electrical outlet, then contact your local dealer or
our service center.