LG LSCG366ST - Manual (Page 13)

13
ENGLISH
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm soapy
water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the grain.
Follow the cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless steel appliance
cleaner or polish, or to find the location of a dealer
nearest you, please call our toll-free customer
service number:
1-800-243-0000
or visit our website at:
us.lgservice.com
STAINLESS STEEL SURFACES
CA R E A N D C L E A N I N G
It’s a good idea to wipe the control panel after each
use of the cooktop.
Clean or rinse the control panel by using a damp
cloth.
Use mild soap and water or a 50/50 solution of
vinegar and water. Use clean water for rinsing.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleaners on
the control knobs - they can cause damage to the
finish of the knobs.
Do not try to bend knobs by pulling them up or down
or by hanging a towel or other such loads.
This can damage the gas valve shaft.
The control knobs may be
removed for easier cleaning.
Make sure the knobs are in
the OFF position and pull
them straight off the stems
for cleaning.
To reinstall the knobs, make sure each the knob has
the OFF position aligned
and slide the knob directly onto the stem.
NOTE: To prevent mis-operation during cleaning
the control knobs, Unplug your cooktop.
CONTROL KNOBS
Surface burner knob