6 appendix, Controlling a tv with the supplied remote control, Setting up the remote to control your tv – LG BP300 User Manual

Page 42: 42 controlling a tv with the supplied, Remote control, 42 – setting up the remote to control your

6 Appendix

Appendix

Appendix

Controlling a TV with

the Supplied Remote

Control

You can control your TV using the buttons below.

By pressing

You can

1 (TV POWER)

Turn the TV on or off.

INPUT

Switch the TV’s input source
between the TV and other
input sources.

VOL +/–

Adjust the volume of the TV

Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.

Note

Setting up the remote to

control your TV

You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,

and press the manufacturer code for your
TV with the numerical buttons (see the table
below).

Manufacturer

Code Number

1(Default), 2

Zenith

1, 3, 4

GoldStar

1, 2

Samsung

6, 7

Sony

8, 9

Hitachi

2. Release the 1 (TV POWER) button to complete

setting.

Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the battery
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.