beautypg.com

Using smartdiagnosis, Specifications – LG DLG3051W User Manual

Page 38

background image

38

Models DLE3050* DLG3051*

Description

Dryer

Electrical requirements*

Please refer to the rating label regarding detailed information.

Gas requirements*

NG 4-10.5 inches WC

LP: 8–13 inches WC (Gas Models only)

Dimensions

27” (W) X 30” (D) X 38

11

/

16

” (H), 51” (D with door open)

68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 129.7 cm (D with door open)

Net weight

Elec : 123.5 lb (56.02 kg)

Gas : 126.2 lb (57.23 kg)

Drying capacity

IEC 7.1 cu. ft. (22.5 lb / 10.2 kg)

SPECIFICATIONS

USING SMARTDIAGNOSIS

TM

If you experience problems with your dryer, call 1-800-243-0000 (1-888-542-2623 in Canada). Follow the call center agent’s instructions, and do

the following steps when requested:

1. Press to turn on the dryer. Do not press any other buttons.

2. When instructed to do so by the call center agent, place the mouthpiece of your phone very close to the POWER button.

3. Press and hold (Temp.Control) for three seconds, while holding the phone mouthpiece to the icon or POWER button.

4. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds, and the display will count down the time.

• For best results, do not move the phone while the tones are being transmitted and do not touch the control panel with the phone.

• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.

• Pressing the POWER button during the transmission will shut off the SMARTDIAGNOSIS™.

5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist

you using the information transmitted for analysis at the call center agent.

SPECIFICATIONS

NOTE

- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has no

meaning except to the call center.

- SMARTDIAGNOSIS™ cannot be activated if the dryer does not power up. If this happens, then troubleshooting must be done without

SMARTDIAGNOSIS™.

- SMARTDIAGNOSIS

TM

is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting through

service calls. The effectiveness of this feature depends upon various factors, including, but not limited to, the reception of the

cellular phone being used for transmission, any external noise that may be present during the transmission, and the acoustics of the

room where the machine is located. Accordingly, LG does not guarantee that SMARTDIAGNOSIS

TM

would accurately troubleshoot

any given issue.

This manual is related to the following products: