LG PG65U - Manual (Page 51)

51 CUSTOMIZING SETTINGS
Setting Description
Color
Temperature
Gamma :Sets a gradation curve between video input and output
signal.
a. Method: 2 points
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is
applied to all the input modes.
b. Method: 10 point IRE
- Pattern: Inner, Outer
- Institute of Radio Engineers (IRE) is the unit indicating the size
of a video signal and can be set to 5, 10, 15, ... 100. You can fine-
tune for each setting as shown below.
- Luminance: If you set up luminance for 100 IRE, a luminance
value satisfying each gamma is automatically
calculated for each step from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is
applied to all the input modes.
Color
Management
system
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors.
You may not see colors change on a normal picture even after
adjustment.
- Chroma Red/Green/Blue/Yellow/Cyan/Magenta, Tone Red/Green/
Blue/Yellow/Cyan, Magenta: The adjustment range is -30 - +30
each.
Available options may differ depending on the input signal or video mode, etc.
Picture Option
Setting Description
Noise
Reduction Removes noises in the picture.
MPEG Noise
Reduction Reduces the noise produced while creating digital video signals.
Black Level Compensates the brightness and contrast of a screen to balance with
the black level of the video input.
Real Cinema Provides optimal picture quality for watching a movie.
Color
Temperature
Adjusts the overall color of the screen to suit your preference. You can
select Warm, Cool, Medium or Natural.