Hd tvlp, Installation – Audiovox HDTVlp User Manual

Page 3

Attaching the Antenna with Reflector to the Base

1. Route the 6' Mini Coax Cable through the Base and screw it securely

to the Antenna

2. Slide the Antenna with Reflector onto the Base
3. Using a screw driver slightly tighten the 2 screws

(see fig 7)

to secure

the Antenna to the Base

Connecting the HDTVlp

1. Connect the Mini Coax Cable

that is attached to the Antenna
to the Power Injector labeled
"Antenna"

2. Connect the 2' Standard Coax

Cable from the Power Injector
labeled "TV" to your HDTV or
Set-top box

3. Connect the 6' Standard Coax

Cable from the Power Injector
labeled "Power" to the
AC Adapter

4. Plug in the AC Adapter to a

standard AC outlet

Attaching Rubber Feet to the Base

Remove the protective adhesive strip from the 4 rubber feet and apply
them to the bottom of the antenna base.

HD
TVlp

Installation

(continued)

Attaching the Reflector to the Antenna

1. Starting from the right side, slide the Clip that is attached to the Reflector

diagonally into the notch at the back of the Antenna.

(see fig 4,5)

2. Once the Clip is pushed in, slide it to the side so that it forms a 90 degree

angle to the Antenna's edge

(see fig 6)

3. Repeat steps 1 and 2 for all four Clips

HD
TVlp

Fig. 5

Fig. 4

Fig. 6

Fig. 7

ANTEN

POWER

ANTEN

POW

2 Coax

Cable

6 Coax

Cable

Fig. 8