Adjusting the stand height – LG 29UM65-P User Manual
Page 13

13
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Adjusting the stand height
2
Remove the
tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head down-
ward.
3
The height can be adjusted up to
110.0 mm.
y
Do not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
Tape
Locking Pin
Stand Body
CAUTION
WARNING
Head
Locking pin
1
Stand the monitor assembled with the stand
base in an upright position
29UB65
110.0 mm
This manual is related to the following products: