AT&T E5655 - Manual (Page 21)

19
Telephone Operation
Base settings
At the feature menu you can change settings to
customize how the telephone works.
Press
SELECT/MENU
, then use the ^V buttons to
scroll to the feature you want to change. As you scroll
through the menu, the top menu item is always high-
lighted with a > symbol. Press
SELECT/MENU
to select
the highlighted item.
Press
CLEAR
at any time to cancel an operation, back
up to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level
(1-6), or turn the ringer off (0). Use the
^V buttons
to hear an example of each volume level, then press
SELECT/MENU
to select the one you prefer.
NOTE: The ringer volume level also determines the level of ringing for
intercom calls (see page 14). If the base ringer volume level is set to off (0),
the base will be silenced for all calls.
Ringer volume can also be temporarily adjusted by
pressing
VOLUME
during incoming ringing.
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
tones. Use the
^V buttons to hear an example of
each ringer tone, then press
SELECT/MENU
to select
the one you prefer.
Key tone
The base is factory programmed to beep at each key
press. Use the
^V buttons to select
ON
or
OFF
,
then press
SELECT/MENU
to save your preference.
NOTE: If you select OFF, you will not hear a beep when you press
keys.
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
91-000373-030-000_E5655_R4.qxd 11/1/2005 10:04 AM Page 19