AT&T E5655 - Manual (Page 10)

8
Getting Started
Wall mounting
The base can be installed on any standard wall-phone outlet as shown below. Choose
a location away from electronic equipment, such as personal computers, computer
routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or mois-
ture.
Connect cords as shown on this page, then press and slide down
firmly so base is held securely on outlet mounting pegs.
Plug power adapter
into an electrical out-
let not controlled by a
wall switch.
Plug telephone line
cord into telephone jack.
Clip wall-mount bracket
securely into notches on
underside of base.
Install the line cord as
shown in the diagram.
91-000373-030-000_E5655_R4.qxd 11/1/2005 10:03 AM Page 8