Airlink101 AWLL3026 User Manual
Page 22
22
4.2 Configuring Encryption Security
Select Enable from the WEP drop-down menu and click Setting.
Key Length: Select the appropriate encryption key length.
Default Key ID: Select which of the four Key Value you want to use.
Key Format: Select either Hexadecimal (0-9, A-F) or ASCII (any number or letter).
Key Value: Enter the applicable key values. Up to four key values may be entered.
Note the following rules when entering Key values:
• 64-bit key length requires 10 Hexadecimal characters (0-9, A-F) or 5 ASCII
characters (any number or letter).
• 128-bit key length requires 26 Hexadecimal characters (0-9, A-F) or 13 ASCII
characters (any number or letter).
• 256-bit key length requires 58 Hexadecimal characters (0-9, A-F) or 19 ASCII
characters (any number of letter).
Authentication Mode: select from Open System or Shared Key.
Fragmentation Threshold: choose from 256 to 2346 bytes.
RTS/CTS Threshold: choose from 0 to 2347 bytes.
Preamble: select Long or Short.
MAC Address Filter: click Setting.