3 others, Others – ArtDio IPF-2000 User Manual

Page 25

Text mode
Original mode

IPF-2000 User Manual

7.3 Others

When H.323 and MGCP protocol used, please refer to the appendix H.323 and MGCP
configuration examples. If IPF-2000 can not work this way, open the corresponding ports on
the NAT/Firewall device.

Figure below shows the possible usage ports for the IPF-2000. Please contact to the network
administrator or MIS person to open these ports on the NAT/Firewall device:

• Register port: For TCP/UDP protocol
• Signal port: For TCP/UDP protocol
• Control port: For TCP/UDP protocol
• RTP port: For UDP protocol