Asus USB-N66 - Manual (Page 11)

USB-N66 WLAN Adapter User Manual
11 ASUS WLAN adapter
To disable the access control function, select Disable in the Access Control
Policy page, then click OK.
To allow a wireless client to associate with the USB-N66:
1. Select Enable in the Access Control Policy page, then click Access tab.
2. Key in the client’s MAC address, then click Add MAC.
3. Click OK.
Only the wireless clients on the Accept list are allowed to associate with the
USB-N66.
To prevent a wireless client from associating with the WLAN adapter:
1. Select Enable in the Access Control Policy page, then click Reject tab.
2. Key in the client’s MAC address, then click Add MAC.
3. Click OK.
The wireless clients on the Reject list are not allowed to associate with the USB-
N66.
In the Soft AP mode, you can limit the wireless clients that associate with the
USB-N66 through the access control function. Click Configuration > Edit
Config > Wireless Mode.
�ou can limit the wireless clients that associate with the WLAN adapter through
the access control function. Click Configuration > Edit Config > ACL.