Myron&Davis NV7HCV1 - Manual (Page 6)

Step 1 - Remove right screw under
right side dash trim
Step 2 - Remove left screw under
left side dash trim
Step 17- Install the factory bracket
onto the Myron & Davis unit
Step 18 - Connect all plus, coonector
according to the wiring diagram
Step 19 - Install Myron & Davis unit,
replace trim & confirm operation
Step 14 - Remove hazard light and install into
Myron & Davis unit
Step 15 - Remove temperature control
and install into Myron & Davis unit
Step 16 - Remove the A/C vent and install
into Myron & Davis unit
5 - Connecting and installing the Myron & Davis unit cont’d.
5 - Connecting and installing the Myron & Davis unit