Myron&Davis NV7HCV1 - Manual (Page 5)

Step 9 - Loosen the OEM Radio clips
& remove
Step 10 - OEM Radio removed
Step 11 - Carefully remove the A/C
knobs with a screwdriver
Step 12 - A/C knobs removed
Step 13 - View of back side of OEM
Radio
Step 14 - Remove the screws securing
the A/C controls, remove and install
into Myron & Davis unit
5 – Remove Factory Radio
Remove the OEM Radio and prepare the Myron and Davis Unit for installation by
following the steps below.
Note: Inspect all fasteners and brackets for damage. Replace as necessary before the
installation process is started.
5 - Connecting and installing the Myron & Davis unit