AEG FM 6300G-AN - Manual (Page 21)

21
Mounting
Cutting Out
The hob can be installed in any type
of kitchen worktop with a thickness
of 28-40 mm. However, if an oven is
to be installed beneath it, the work-
top must be at least 40 mm thick.
When mounting this hob: Read the
instructions on this and the follow-
ing page.
When mounting this hob in conjunc-
tion with other units in this range:
Read the instructions in the section
“Mounting more than one hob”.
For mounting this hob you will need
a Phillips screw driver and the four
fixings supplied (See fig.).
Distance to wall:
Min. 150 mm from flammable mate-
rial.
Min. 50 mm from non-flammable
material.
Clamping fittings