AEG FM 6300G-AN - Manual (Page 11)

11
Burners
Make quite sure the burner
ring and burner cap are posi-
tioned correctly over the
burner top.
For correct combustion the burner
rings and burner cap must be posi-
tioned correctly over the burner
body. If the burner rings and caps
are off-centre, the gas flame will
burn incorrectly and the burner cap
may be ruined in a short space of
time.
Control knobs
The control knobs have the follow-
ing settings:
Off:
O
Minimum:
f
Maximum:
e
1. Press down the control knob for
the desired burner
2. Hold the knob down while turn-
ing it to the left to
e
.
3. Keep the knob pressed down for
4-5 seconds. Then release it and
turn the knob to the required set-
ting.
Burner ring Burner cap
Burner body Safety device
Right
Wrong