Installation, Technical data, 2 closing the door – Electrolux EN3450COX User Manual
Page 25: 1 positioning, 2 electrical connection
![background image](/manuals/384453/25/background.png)
Only service is allowed to replace the con-
trol unit. Contact your Service Center.
7.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, replace the defective
door gaskets. Contact the After Sales
Service.
8. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
8.2 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
9. TECHNICAL DATA
Dimension of the recess
Height
1850 mm
Width
595 mm
Depth
658 mm
Rising Time
18 h
Voltage
230 - 240 V
Frequency
50 Hz
The technical information are situated in
the rating plate on the internal left side of
the appliance and in the energy label.
ENGLISH
25