Electrolux EUF2742AOW - Manual (Page 31)

8.6 Door reversibility
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power sock-
et.
• Unscrew the upper pin and screw it on
the opposite side.
• Remove the door.
2
1
• Remove the plinth .
• Remove the cap (A) and position it on
the opposite side.
• Unscrew the lower hinge (C) and the
washers (B)
• Position the pin and the washers on the
opposite side .
A
C
B
• Re-screw the upper hinge.
• Refit the door.
• Remove the covers. (B) Remove the
cover pins. (A)
• Unscrew the handles and fix them on
the opposite side. (C)
• Re-insert the cover pins (A) on the op-
posite side
A
C
B
• Do a final check to make sure that:
– All screws are tightened.
– The door opens and closes correctly.
• If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit per-
fectly to the cabinet. In that case, wait
for the natural fitting of the gasket.
In case you do not want to carry out
the above mentioned operations, con-
tact the nearest After Sales Service
Force. The After Sales Service specialist
will carry out the reversibility of the
doors at your cost.
ENGLISH 31