Daily use, 1 language, 2 starting a programme without delay start – Electrolux EDH3498RDL User Manual

Page 11: 3 starting the programme with delay start, 4 auto off function, 5 change a programme

• The indicator

is off and the indi-

cator

is on.

– The indicator of the water con-

tainer is off. After approximately 4
seconds, the 2 indicators go off .

• The indicators

and

are

on.
– The indicator of the water con-

tainer is on. After approximately 4
seconds, the 2 indicators go off

7. DAILY USE

Before you use the appliance for
the first time do one of these op-
erations:
• Clean the tumble dryer drum

with a moist cloth.

• Start a short programme (e.g.

30 minutes) with moist laundry.

At the beginning of drying cycle
(3-5 min.) there could be a slightly
higher sound level. It is because of
start of the compressor that is
normal for compressor powered
appliances such: refrigerators,
freezers .

7.1 Language

The first time you activate the appliance
the default language comes into the view
on the display. You can confirm it or set
the different language.
To set the different language:
1. Press the

touchpad to set

your language

2. To memorise the selection press the

Start/Pause touchpad.

You can change the language each time
you want ( see Settings chapter).

7.2 Starting a programme
without delay start

1. Prepare the laundry and load the ap-

pliance.

2. Press the on/off button to activate the

appliance.

3. Set the correct programme and op-

tions for the type of load.
• The display shows the programme

duration.

4. Press the Start/Pause touchpad, the

programme starts.

CAUTION!
Make sure that when you close
the door, the laundry does not
catch between the appliance door
and the rubber seal.

7.3 Starting the programme with
delay start

1. Set the correct programme and op-

tions for the type of load.

2. Press the delay start button again and

again until the display shows the delay
time you want to set.
• You can delay the start of a pro-

gramme from a minimum of 30 mi-
nutes to a maximum of 20 hours.

3. Press the Start/Pause touchpad, the

countdown starts. The display shows
the countdown of the delay start.
• When the countdown is completed,

the programme starts.

7.4 Auto Off function

To decrease the energy consumption, this
function automatically deactivates the ap-
pliance:
• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the pro-

gramme.

7.5 Change a programme

1. Press the on/off button to deactivate

appliance

2. Press the on/off button to activate the

appliance.

3. Set the programme.

ENGLISH