Avital Auto Security System MAXX1 User Manual

Page 14

®2002 Directed Electronics, Inc.

To De-activate:

Press the

button for one to two seconds.

The siren will shut off and the indicator lights will stop flashing.

If you wish to arm the alarm system but leave a window or sun-

roof open or a pet or passenger inside the vehicle, you will need

to bypass the Ultrasonic Sensor and any optional sensors by fol-

lowing the procedure noted below:

Arm the alarm with the

button.

At anytime after the alarm system has been armed, press the

and buttons

together.

To indicate sensor(s) bypass the indicator lights flash once.

NOTE: The next time the alarm system is armed the sensors will be re-
enabled automatically.

You should place your system in Protected Valet Mode whenever

your vehicle is being fueled or washed, or whenever the passive

Immobilisation or arming is not required for a short period. The

Valet PIN code number for your system is noted on the back of this

guide.

Note: To change your PIN code refer to How to Change Your PIN Code sec-
tion of this guide.

Protected Valet Mode

Sensor Bypass