Avital Auto Security System MAXX1 - Manual (Page 12)

®2002 Directed Electronics, Inc. 12
System Operation
The alarm can be programmed for active or passive arming. Active
arming means the alarm is armed using the remote control. Passive
arming means the alarm will automatically arm itself. (See the
Programming Table for System Features section of this guide.)
Press the button for one to two seconds. The following will occur:
■ The siren will chirp twice and the indicator lights will flash
twice. The doors will lock.* The LED will double flash, pause,
double flash, pause, etc., and the built in AutoImmobiliser
will disable two vital engine circuits.
* Requires connection to your vehicle’s existing central locking system.
The Maxx1 has three programmable options relating to passive
arming of the alarm. A full description of the operation and pro-
gramming options for the passive arming feature can be found on
page 21.
Press the button for one to two seconds. The following will occur:
■ The siren will chirp once and the indicator lights will flash
once. The doors will unlock.* The immobilised engine circuits
Disarming the System (if alarm is not sounding)
Passive Arming
Active Arming*