Audiovox XM-RCV - Manual (Page 10)

Determine the mounting location and drill four 4mm mounting holes.
3. Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and
Lock Washers.
1. Attach the mounting brackets to each side of the RRU, using the 4 Phillips Round Head
Screws (4mm x 8mm).
PROCEDURE for the MOUNTING of the RRU UNDER THE REAR DECK
10
Bracket
Phillips Head Screws
used in 4 places (4mm x 8mm)
Underside of
Rear Deck
4x 1/8” (4mm)
mounting holes
(4 places)
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
Rear
Deck
2.