Bosch HUI54451UC - Manual (Page 10)

10
Cleaning the metal grease filter
9 WARNING
RISK OF FIRE
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance without the grease
filter.
Notes
▯
Do not use any aggressive, acidic or alkaline cleaning
agents.
▯
When cleaning the metal grease filters, also clean the
metal grease filter holder in the appliance with a moist
cloth.
▯
You can clean the metal grease filters in a dishwasher
or by hand.
In the dishwasher:
Note: Slight discoloration is possible when cleaning the
grease filters in the dishwasher. This does not affect the
metal grease filter's functioning.
▯
Do not clean extremely dirty metal grease filters with
dishes.
▯
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
▯
Soak the metal grease filters in hot soapy solution.
▯
Use a brush for cleaning and then rinse the filters well.
▯
Allow the metal grease filters to drip dry.
Uninstalling metal grease filter
1. Open the lock and fold down the metal grease filter.
While doing this, place your other hand under the
metal grease filter.
2. Take metal mesh grease filter out of the holder.
Note: Grease can accumulate in the bottom of the
metal mesh grease filter. Do not hold metal mesh
grease filter at an angle, otherwise grease will drip out.
3. Clean the metal mesh grease filter.
4. After removing the filters, clean the inside of the
appliance.
Installing metal grease filter
1. Insert metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2. Flip metal grease filter up and snap the latch into
place.
Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
9 WARNING
RISK OF ELECTRIC SHOCK
Improper repairs are dangerous. Only an after-sales
technician trained by us may perform repairs and
may replace damaged connecting leads. Remove
the mains plug or deactivate the fuse in the fuse box
if the appliance is defective. Call after-sales service.
Troubleshooting table
--------
Disruption Possible
cause
Solution
Appliance is
not working
Plug is not
plugged in
Connect the appliance
to the mains
Power outage Check whether other
kitchen appliances are
working
Fuse defec-
tive
Check in the fuse box
whether the fuse for the
appliance is in working
order
Lighting not
working.
Bulbs defec-
tive.
Replace bulbs, see
chapter "Replace Bulbs."