Bosch HGS7052UC - Manual (Page 44)

English 40
To replace the oven door:
Replacing an Oven Light Each light assembly consists of a removable lens, a light bulb and a light socket
housing that is fixed in place.
1. Read the WARNING above.
2. Turn off power at the main power supply (fuse or breaker box).
3. Remove the lens by unscrewing it.
4. Remove the light bulb from its socket by unscrewing it.
5. Replace the bulb with a new 40 watt appliance bulb. Avoid touching the bulb
with fingers, as oils from hands can damage the bulb when it becomes hot.
6. Screw the lens back on.
7. Turn power back on at the main power supply (fuse or breaker box).
Light socket is live when door is open if main power supply is not turned off.
Before Calling Service
1. Hold the door firmly in both hands.
2. Hold the door at a 30º angle from the
closed position and insert hinges into the
slots.
You may need to rock the door forward and
backward slightly to seat the hinge feet.
3. The door may need to be removed and re-
inserted until the hinges sit correctly in the
slots.
4. Open door all the way to expose hinges,
levers, and slots.
5. Push levers forward and down until seated
on the bracket.
6. Close and open door slowly to be sure it is
correctly and securely in place. Door must
be straight, not crooked.
WARNING
• Make sure the appliance and lights are cool and power to the appliance
has been turned off before replacing the light bulb(s). Failure to do so
could result in electrical shock or burns.
• The lenses (if equipped) must be in place when using the appliance.
• The lenses (if equipped) serve to protect the light bulb from breaking.
• The lenses (if equipped) are made of glass. Handle carefully to avoid
breaking. Broken glass could cause an injury.
• Light socket is live when door is open
Service