Remove the door lock from the dryer, Screw the door to the dryer – Bosch WTB86202UC User Manual
Page 17
17
9.
Prepare the hinge insert and the hook insert to install
and then screw them following the instructions below.
10.
Remove screws from the door lock cover and then
remove it from the dryer.
11.
Remove the door lock from the dryer.
12.
Install the door lock (1.) and then door lock cover (2.)
at the opposite site of the door seal.
13.
Screw the door to the dryer.
14.
You can now put in the power supply plug and close
the door to start operating the dryer.