Airlink101 AWLH3025 - Manual (Page 18)

- 14 -
Preferred SSID Type in the SSID name of the device you want to
connect to.
BSS Type You can select the connection type: Peer-to-Peer,
Access Point or Auto Mode.
Tx Rate You can select the data rate or set to auto mode from the
pull-down menu.
Channel Select the channel you want to use.
Power Mode No Power Save：the adapter will be in full active mode.
Max Power Save：the power save mode will be enabled.
4x Config Select to disable or enable the TI-Based 4x function.
Packet Burst Enable Enable this function（if the device you connect
supports Packet Bursting Mode） to increase the
efficiency of your network.
Mode Select from IEEE 802.11b(B-Only), 802.11b
+(B-Plus) , 802.11g (G-Only) or B&G Mode (If you
choose this option the device will automatically convert
the suitable standard ).
Profile
Enter the profile name and click the Save button to
save your configuration, To open the profiles you