Electrolux ENN2914AOW - Manual (Page 14)

Problem Possible cause Solution
Water flows on the
ground. The melting water outlet
does not flow in the evapo-
rative tray above the com-
pressor. Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
low. The temperature regulator
is not set correctly. Set a higher temperature.
The temperature in
the appliance is too
high. The temperature regulator
is not set correctly. Set a lower temperature.
The door is not closed cor-
rectly. Refer to "Closing the door".
The product temperature is
too high. Let the product temperature
decrease to room tempera-
ture before storage.
Many products are stored
at the same time. Store less products at the
same time.
The temperature in
the refrigerator is too
high. There is no cold air circula-
tion in the appliance. Make sure that there is cold
air circulation in the appli-
ance.
The temperature in
the freezer is too
high. Products are too near to
each other. Store products so that there
is cold air circulation.
There is too much
frost. Food is not wrapped cor-
rectly. Wrap the food correctly.
The door is not closed cor-
rectly. Refer to "Closing the door".
The temperature regulator
is not set correctly. Set a higher temperature.
14 www.electrolux.com