Manual adjustment, Electronic adjustment – Electrolux ESI6700RAX User Manual
Page 29
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
29 - 36
51 - 64
5.1 - 6.4
36 - 45
2
1)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
2
1)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2. Press and hold, at the same time, De-
lay and EnergySaver until the indica-
tors
,
and
start to flash.
3. Press MyFavourite,
•
The indicators
and
go off.
• The indicator
continues to
flash.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
4. Press MyFavourite again and again
to change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
29