Electrolux EXP09HN1WI - Manual (Page 9)

ENGLISH 9
Exhausting hot air window
discharge
*OUIF$00-*/(.PEFUIFBQQMJBODF
must be placed close to a window or
opening so that the warm exhaust air
can be ducted outside.
First position unit on a flat floor and
make sure there's a minimum of
30.5cm clearance around the unit, and
is within the vicinity of a single circuit
outlet power source.
1. Take the hose out from the
packaging. (Fig.3).
Fig. 3
2. Remove adaptor A from unit by
sliding upwards (Fig.4).
Slide upwards Slide upwards
Fig. 4
3. Extend either side of the hose
(Fig. 5) and screw the hose to
adaptor A (Fig. 6).
Extend the side of hose
Fig. 5
Fig. 6
4. Extend the other side of the hose
and screw it to adaptor B (Fig. 7).
Fig. 7
5. Slide the assembly onto unit (Fig. 8).
Slide onto Slide onto
Fig. 8
6. Affix the adaptor B into the window
slider kit and seal. (Fig. 9a&9b)
Window Slider Kit
window
Vertical
window
Window Slider Kit
Minimum:67.5cm(26.6")
Maxmum:123cm(48.5")
Fig. 9a
Window Slider Kit
window
&I B
Horizontal
window
Window Slider Kit
Minimum:67.5cm(26.6")
Maxmum:123cm(48.5")
Fig. 9b
*/45"--"5*0/*/4536$5*0/4